dmesg - Intel Core 2 Quad Q6600 - eVGA NVIDIA GeForce 8800 GT
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11.0-12-generic (buildd@allspice) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu7) ) #19-Ubuntu SMP Wed Oct 9 16:20:46 UTC 2013 (Ubuntu 3.11.0-12.19-generic 3.11.3)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e3ff] usable
BIOS-e820: [mem 0x000000000009e400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cfedffff] usable
BIOS-e820: [mem 0x00000000cfee0000-0x00000000cfee2fff] ACPI NVS
BIOS-e820: [mem 0x00000000cfee3000-0x00000000cfeeffff] ACPI data
BIOS-e820: [mem 0x00000000cfef0000-0x00000000cfefffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: OEM OEM/LP UT P35, BIOS 6.00 PG 09/19/2008
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x230000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CBFFF write-protect
CC000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 100000000 mask F00000000 write-back
1 base 200000000 mask FE0000000 write-back
2 base 220000000 mask FF0000000 write-back
3 base 000000000 mask F80000000 write-back
4 base 080000000 mask FC0000000 write-back
5 base 0C0000000 mask FF0000000 write-back
6 base 0CFF00000 mask FFFF00000 uncachable
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 4GB, range: 4GB, type WB
reg 1, base: 8GB, range: 512MB, type WB
reg 2, base: 8704MB, range: 256MB, type WB
reg 3, base: 0GB, range: 2GB, type WB
reg 4, base: 2GB, range: 1GB, type WB
reg 5, base: 3GB, range: 256MB, type WB
reg 6, base: 3327MB, range: 1MB, type UC
total RAM covered: 8191M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 2M num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 3327MB, range: 1MB, type UC
reg 4, base: 4GB, range: 4GB, type WB
reg 5, base: 8GB, range: 512MB, type WB
reg 6, base: 8704MB, range: 256MB, type WB
e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcfee0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f4700-0x000f470f] mapped at [ffff8800000f4700]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd1000, 0x01fd1fff] PGTABLE
BRK [0x01fd2000, 0x01fd2fff] PGTABLE
BRK [0x01fd3000, 0x01fd3fff] PGTABLE
init_memory_mapping: [mem 0x22fe00000-0x22fffffff]
[mem 0x22fe00000-0x22fffffff] page 2M
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
init_memory_mapping: [mem 0x22c000000-0x22fdfffff]
[mem 0x22c000000-0x22fdfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x22bffffff]
[mem 0x200000000-0x22bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcfedffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xcfdfffff] page 2M
[mem 0xcfe00000-0xcfedffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 2M
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
RAMDISK: [mem 0x34dae000-0x366cefff]
ACPI: RSDP 00000000000f86b0 00014 (v00 IntelR)
ACPI: RSDT 00000000cfee3000 0003C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 00000000cfee3080 00074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 00000000cfee3100 05720 (v01 INTELR AWRDACPI 00001000 MSFT 03000000)
ACPI: FACS 00000000cfee0000 00040
ACPI: HPET 00000000cfee8900 00038 (v01 IntelR AWRDACPI 42302E31 AWRD 00000098)
ACPI: WDRT 00000000cfee8940 00047 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: MCFG 00000000cfee89c0 0003C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: APIC 00000000cfee8840 00084 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: SSDT 00000000cfee9320 003A8 (v01 PmRef CpuPm 00003000 INTL 20050309)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000022fffffff]
Initmem setup node 0 [mem 0x00000000-0x22fffffff]
NODE_DATA [mem 0x22fff5000-0x22fff9fff]
[ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x22fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0xcfedffff]
node 0: [mem 0x100000000-0x22fffffff]
On node 0 totalpages: 2096765
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 13244 pages used for memmap
DMA32 zone: 847584 pages, LIFO batch:31
Normal zone: 19456 pages used for memmap
Normal zone: 1245184 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcfee0000-0xcfee2fff]
PM: Registered nosave memory: [mem 0xcfee3000-0xcfeeffff]
PM: Registered nosave memory: [mem 0xcfef0000-0xcfefffff]
PM: Registered nosave memory: [mem 0xcff00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xcff00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88022fc00000 s86720 r8192 d23872 u524288
pcpu-alloc: s86720 r8192 d23872 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2063980
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8147144K/8387060K available (7141K kernel code, 1082K rwdata, 3260K rodata, 1364K init, 1420K bss, 239916K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-255.
NR_IRQS:16640 nr_irqs:712 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2399.911 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.82 BogoMIPS (lpj=9599644)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27796 entries in 109 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (fam: 06, model: 0f, stepping: 0b)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 OK
Brought up 4 CPUs
smpboot: Total of 4 processors activated (19199.28 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcfee0000-0xcfee2fff] (12288 bytes)
regulator-dummy: no parameters
RTC time: 19:55:42, date: 08/10/14
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: SSDT 00000000cfee8a40 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20050309)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20050309)
ACPI: SSDT 00000000cfee8f00 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20050309)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20050309)
ACPI: SSDT 00000000cfee9060 00152 (v01 PmRef Cpu2Ist 00003000 INTL 20050309)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00152 (v01 PmRef Cpu2Ist 00003000 INTL 20050309)
ACPI: SSDT 00000000cfee91c0 00152 (v01 PmRef Cpu3Ist 00003000 INTL 20050309)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00152 (v01 PmRef Cpu3Ist 00003000 INTL 20050309)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130517/hwxface-571)
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xcff00000-0xfebfffff]
pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0xff00-0xff1f]
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0xfe00-0xfe1f]
pci 0000:00:1a.1: System wakeup disabled by ACPI
pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io 0xfd00-0xfd1f]
pci 0000:00:1a.2: System wakeup disabled by ACPI
pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xfdfff000-0xfdfff3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfdff4000-0xfdff7fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xfc00-0xfc1f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xfb00-0xfb1f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xfa00-0xfa1f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xfdffe000-0xfdffe3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100
pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 003f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0100 (mask 003f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0290 (mask 000f)
pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf900-0xf907]
pci 0000:00:1f.2: reg 0x14: [io 0xf800-0xf803]
pci 0000:00:1f.2: reg 0x18: [io 0xf700-0xf707]
pci 0000:00:1f.2: reg 0x1c: [io 0xf600-0xf603]
pci 0000:00:1f.2: reg 0x20: [io 0xf500-0xf51f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfdffd000-0xfdffd7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfdffc000-0xfdffc0ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
pci 0000:01:00.0: [10de:0611] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit]
pci 0000:01:00.0: reg 0x24: [io 0x8f00-0x8f7f]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:1c.0: bridge window [mem 0xfd800000-0xfd8fffff]
pci 0000:00:1c.0: bridge window [mem 0xfd500000-0xfd5fffff 64bit pref]
pci 0000:03:00.0: [1b21:1040] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xfd4f8000-0xfd4fffff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xfd400000-0xfd4fffff]
pci 0000:00:1c.1: bridge window [mem 0xfd300000-0xfd3fffff 64bit pref]
pci 0000:04:00.0: [11ab:4362] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [mem 0xfdefc000-0xfdefffff 64bit]
pci 0000:04:00.0: reg 0x18: [io 0xbe00-0xbeff]
pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.3: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:1c.3: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
pci 0000:05:00.0: [197b:2363] type 00 class 0x010185
pci 0000:05:00.0: reg 0x24: [mem 0xfdcfe000-0xfdcfffff]
pci 0000:05:00.0: PME# supported from D3hot
pci 0000:05:00.1: [197b:2363] type 00 class 0x010185
pci 0000:05:00.1: reg 0x10: [io 0xaf00-0xaf07]
pci 0000:05:00.1: reg 0x14: [io 0xae00-0xae03]
pci 0000:05:00.1: reg 0x18: [io 0xad00-0xad07]
pci 0000:05:00.1: reg 0x1c: [io 0xac00-0xac03]
pci 0000:05:00.1: reg 0x20: [io 0xab00-0xab0f]
pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.4: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:1c.4: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci 0000:06:00.0: [11ab:4360] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [mem 0xfdafc000-0xfdafffff 64bit]
pci 0000:06:00.0: reg 0x18: [io 0x9e00-0x9eff]
pci 0000:06:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.5: PCI bridge to [bus 06]
pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.5: bridge window [mem 0xfda00000-0xfdafffff]
pci 0000:00:1c.5: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
pci 0000:07:01.0: [14e4:4318] type 00 class 0x028000
pci 0000:07:01.0: reg 0x10: [mem 0xfd7fc000-0xfd7fdfff]
pci 0000:07:03.0: [1106:3044] type 00 class 0x0c0010
pci 0000:07:03.0: reg 0x10: [mem 0xfd7ff000-0xfd7ff7ff]
pci 0000:07:03.0: reg 0x14: [io 0xcf00-0xcf7f]
pci 0000:07:03.0: supports D2
pci 0000:07:03.0: PME# supported from D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1e.0: bridge window [mem 0xfd700000-0xfd7fffff]
pci 0000:00:1e.0: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
ACPI: Enabled 2 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e400-0x0009ffff]
e820: reserve RAM buffer [mem 0xcfee0000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0800-0x087f] has been reserved
system 00:00: [io 0x0290-0x030f] has been reserved
system 00:00: [io 0x0290-0x0297] has been reserved
system 00:00: [io 0x0880-0x088f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [dma 2]
pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:08: [io 0x0400-0x04bf] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: disabling [mem 0x0000046e-0x0000056d] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
pnp 00:0b: disabling [mem 0x0000046e-0x0000056d disabled] because it overlaps 0000:04:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
pnp 00:0b: disabling [mem 0x0000046e-0x0000056d disabled] because it overlaps 0000:06:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
system 00:0b: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:0b: [mem 0xcff00000-0xcfffffff] has been reserved
system 00:0b: [mem 0xfed00000-0xfed000ff] has been reserved
system 00:0b: [mem 0xcfee0000-0xcfefffff] could not be reserved
system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0b: [mem 0x00100000-0xcfedffff] could not be reserved
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfed14000-0xfed1dfff] has been reserved
system 00:0b: [mem 0xfed20000-0xfed9ffff] has been reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
system 00:0b: [mem 0x000e0000-0x000effff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x8000-0x8fff]
pci 0000:00:01.0: bridge window [mem 0xf8000000-0xfbffffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x7000-0x7fff]
pci 0000:00:1c.0: bridge window [mem 0xfd800000-0xfd8fffff]
pci 0000:00:1c.0: bridge window [mem 0xfd500000-0xfd5fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.1: bridge window [mem 0xfd400000-0xfd4fffff]
pci 0000:00:1c.1: bridge window [mem 0xfd300000-0xfd3fffff 64bit pref]
pci 0000:04:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref]
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff]
pci 0000:00:1c.3: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:00:1c.3: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [io 0xa000-0xafff]
pci 0000:00:1c.4: bridge window [mem 0xfdc00000-0xfdcfffff]
pci 0000:00:1c.4: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci 0000:06:00.0: BAR 6: assigned [mem 0xfd900000-0xfd91ffff pref]
pci 0000:00:1c.5: PCI bridge to [bus 06]
pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
pci 0000:00:1c.5: bridge window [mem 0xfda00000-0xfdafffff]
pci 0000:00:1c.5: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 07]
pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1e.0: bridge window [mem 0xfd700000-0xfd7fffff]
pci 0000:00:1e.0: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:02: resource 1 [mem 0xfd800000-0xfd8fffff]
pci_bus 0000:02: resource 2 [mem 0xfd500000-0xfd5fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xfd400000-0xfd4fffff]
pci_bus 0000:03: resource 2 [mem 0xfd300000-0xfd3fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:04: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
pci_bus 0000:05: resource 1 [mem 0xfdc00000-0xfdcfffff]
pci_bus 0000:05: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:06: resource 1 [mem 0xfda00000-0xfdafffff]
pci_bus 0000:06: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:07: resource 1 [mem 0xfd700000-0xfd7fffff]
pci_bus 0000:07: resource 2 [mem 0xfd600000-0xfd6fffff 64bit pref]
pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:07: resource 8 [mem 0xcff00000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 4 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 25732K (ffff880034dae000 - ffff8800366cf000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcbee0000-0xcfee0000] (64MB) mapped at [ffff8800cbee0000-ffff8800cfedffff]
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1407700542.668:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 15962
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
pcieport 0000:00:1c.5: irq 45 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 15
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN] (on)
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (28 C)
GHES: HEST is not enabled!
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: setting latency timer to 64
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: cache line size of 4 is not supported
ehci-pci 0000:00:1a.7: irq 18, io mem 0xfdfff000
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.11.0-12-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: cache line size of 4 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdffe000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.11.0-12-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.11.0-12-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.11.0-12-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fd00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.11.0-12-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 3.11.0-12-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 3.11.0-12-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 3.11.0-12-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9
xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 50 for MSI/MSI-X
usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
usb usb9: SerialNumber: 0000:03:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 10
usb usb10: New USB device found, idVendor=1d6b, idProduct=0003
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 3.11.0-12-generic xhci_hcd
usb usb10: SerialNumber: 0000:03:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: fddf6943d8ac4f5b6eb0919a7a3ee3d9088b1bfa'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
Magic number: 10:669:950
tty tty7: hash matches
memory memory3: hash matches
rtc_cmos 00:03: setting system clock to 2014-08-10 19:55:43 UTC (1407700543)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1040K (ffff8800016fc000 - ffff880001800000)
Freeing unused kernel memory: 836K (ffff880001b2f000 - ffff880001c00000)
systemd-udevd[117]: starting version 204
floppy: module verification failed: signature and/or required key missing - tainting kernel
sky2: driver version 1.30
sky2 0000:04:00.0: Yukon-2 EC chip revision 2
sky2 0000:04:00.0: irq 51 for MSI/MSI-X
sky2 0000:04:00.0 eth0: addr 00:01:29:a3:14:2c
sky2 0000:06:00.0: Yukon-2 EC chip revision 2
sky2 0000:06:00.0: irq 52 for MSI/MSI-X
sky2 0000:06:00.0 eth1: addr 00:01:29:a3:14:10
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 53 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc ems
ahci 0000:00:1f.2: setting latency timer to 64
pata_jmicron 0000:05:00.1: enabling device (0000 -> 0001)
pata_jmicron 0000:05:00.1: setting latency timer to 64
scsi0 : pata_jmicron
scsi1 : pata_jmicron
ata1: PATA max UDMA/100 cmd 0xaf00 ctl 0xae00 bmdma 0xab00 irq 17
ata2: PATA max UDMA/100 cmd 0xad00 ctl 0xac00 bmdma 0xab08 irq 17
FDC 0 is a post-1991 82077
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata3: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd100 irq 53
ata4: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd180 irq 53
ata5: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd200 irq 53
ata6: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd280 irq 53
ata7: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd300 irq 53
ata8: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd380 irq 53
ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
scsi8 : ahci
scsi9 : ahci
ata9: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe100 irq 16
ata10: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe180 irq 16
firewire_ohci 0000:07:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
ata1.00: ATAPI: ASUS DRW-1612BL, 1.10, max UDMA/66
ata1.00: configured for UDMA/66
scsi 0:0:0:0: CD-ROM ASUS DRW-1612BL 1.10 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
ata9: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata8.00: ATA-8: ST3000DM001-1E6166, SC48, max UDMA/133
ata8.00: 5860533168 sectors, multi 0: LBA48
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-8: Hitachi HDS5C3020ALA632, ML6OA5C0, max UDMA/133
ata6.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata6.00: configured for UDMA/133
ata4.00: ATA-8: WDC WD1500HLFS-01G6U0, 04.04V01, max UDMA/133
ata4.00: 293046768 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata8.00: configured for UDMA/133
ata4.00: configured for UDMA/133
ata7.00: ATA-8: WDC WD5000HHTZ-04N21V0, 04.06A00, max UDMA/133
ata7.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata7.00: configured for UDMA/133
ata5.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata5.00: configured for UDMA/133
ata3.00: ATA-8: Corsair CSSD-F120GB2, 2.0, max UDMA/133
ata3.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
firewire_core 0000:07:03.0: created device fw0: GUID 000129200006bb2a, S400
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA Corsair CSSD-F12 2.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: Attached scsi generic sg1 type 0
scsi 3:0:0:0: Direct-Access ATA WDC WD1500HLFS-0 04.0 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdb] 293046768 512-byte logical blocks: (150 GB/139 GiB)
sd 3:0:0:0: Attached scsi generic sg2 type 0
scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sda: sda1 sda2
sd 4:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
scsi 5:0:0:0: Direct-Access ATA Hitachi HDS5C302 ML6O PQ: 0 ANSI: 5
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 5:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 2:0:0:0: [sda] Attached SCSI disk
sd 5:0:0:0: Attached scsi generic sg4 type 0
sd 5:0:0:0: [sdd] Write Protect is off
sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 6:0:0:0: Direct-Access ATA WDC WD5000HHTZ-0 04.0 PQ: 0 ANSI: 5
sd 6:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 6:0:0:0: [sde] 4096-byte physical blocks
sd 6:0:0:0: Attached scsi generic sg5 type 0
sd 6:0:0:0: [sde] Write Protect is off
sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 7:0:0:0: Direct-Access ATA ST3000DM001-1E61 SC48 PQ: 0 ANSI: 5
sd 7:0:0:0: Attached scsi generic sg6 type 0
sd 7:0:0:0: [sdf] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 7:0:0:0: [sdf] 4096-byte physical blocks
sd 7:0:0:0: [sdf] Write Protect is off
sd 7:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 7:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sde: sde1 sde2
sd 6:0:0:0: [sde] Attached SCSI disk
sdb: sdb1 sdb2
sd 3:0:0:0: [sdb] Attached SCSI disk
sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 >
sd 4:0:0:0: [sdc] Attached SCSI disk
sdf: sdf1 sdf2
sd 7:0:0:0: [sdf] Attached SCSI disk
sdd: sdd1 sdd2 sdd3 < sdd5 sdd6 >
sd 5:0:0:0: [sdd] Attached SCSI disk
usb 4-1: new low-speed USB device number 2 using uhci_hcd
tsc: Refined TSC clocksource calibration: 2399.999 MHz
usb 4-1: New USB device found, idVendor=045e, idProduct=0047
usb 4-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 4-1: Product: Microsoft 5-Button Mouse with IntelliEye(TM)
usb 4-1: Manufacturer: Microsoft
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input2
hid-generic 0003:045E:0047.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1a.1-1/input0
usb 5-2: new low-speed USB device number 2 using uhci_hcd
usb 5-2: New USB device found, idVendor=04d9, idProduct=0702
usb 5-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 5-2: Product: USB Keyboard
input: USB Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input3
hid-generic 0003:04D9:0702.0002: input,hidraw1: USB HID v1.00 Keyboard [USB Keyboard] on usb-0000:00:1a.2-2/input0
Switched to clocksource tsc
raid6: sse2x1 4013 MB/s
raid6: sse2x2 5113 MB/s
raid6: sse2x4 7163 MB/s
raid6: using algorithm sse2x4 (7163 MB/s)
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 9850.000 MB/sec
generic_sse: 8706.000 MB/sec
xor: using function: prefetch64-sse (9850.000 MB/sec)
bio: create slab at 1
Btrfs loaded
device label btrfs0 devid 1 transid 9625 /dev/sdd6
device label btrm0d5p1 devid 1 transid 10 /dev/sdf1
EXT4-fs (sdc2): INFO: recovery required on readonly filesystem
EXT4-fs (sdc2): write access will be enabled during recovery
EXT4-fs (sdc2): orphan cleanup on readonly fs
EXT4-fs (sdc2): 2 orphan inodes deleted
EXT4-fs (sdc2): recovery complete
EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
init: ureadahead main process (246) terminated with status 5
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
systemd-udevd[400]: starting version 204
lp: driver loaded but no devices found
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
it87: Found IT8718F chip at 0x290, revision 2
it87: VID is disabled (pins used for GPIO)
it87: Beeping is supported
ACPI Warning: 0x0000000000000295-0x0000000000000296 SystemIO conflicts with Region \IP__ 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ppdev: user-space parallel port driver
EXT4-fs (sdc2): re-mounted. Opts: errors=remount-ro
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
XFS (sdd5): Mounting Filesystem
XFS (sdd5): Ending clean mount
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdc1): using internal journal
EXT3-fs (sdc1): mounted filesystem with ordered data mode
device-mapper: multipath: version 1.5.1 loaded
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PM2S 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000000000004b0-0x00000000000004bf SystemIO conflicts with Region \GPO2 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000480-0x00000000000004af SystemIO conflicts with Region \GPO_ 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
microcode: CPU0 sig=0x6fb, pf=0x10, revision=0xb3
cfg80211: Calling CRDA to update world regulatory domain
[drm] Initialized drm 1.1.0 20060810
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
wl: module license 'MIXED/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
resource map sanity check conflict: 0xfd7fc000 0xfd7fffff 0xfd7fc000 0xfd7fdfff 0000:07:01.0
------------[ cut here ]------------
WARNING: CPU: 0 PID: 505 at /build/buildd/linux-3.11.0/arch/x86/mm/ioremap.c:171 __ioremap_caller+0x2d3/0x380()
Info: mapping multiple BARs. Your kernel is fine.
Modules linked in: wl(POF+) snd_rawmidi(F) snd_seq(F) snd_seq_device(F) snd_timer(F) snd(F) soundcore(F) lib80211 drm cfg80211 microcode(F+) lpc_ich dm_multipath(F) serio_raw(F) scsi_dh(F) mac_hid xfs(F) parport_pc(F) ppdev(F) coretemp adt7475 hwmon_vid lp(F) parport(F) btrfs(F) xor(F) zlib_deflate(F) raid6_pq(F) libcrc32c(F) hid_generic usbhid hid pata_acpi firewire_ohci psmouse(F) firewire_core crc_itu_t(F) pata_jmicron ahci(F) libahci(F) sky2 floppy(F)
CPU: 0 PID: 505 Comm: systemd-udevd Tainted: PF O 3.11.0-12-generic #19-Ubuntu
Hardware name: OEM OEM/LP UT P35, BIOS 6.00 PG 09/19/2008
0000000000000009 ffff88021e01d9e8 ffffffff816e547a ffff88021e01da30
ffff88021e01da20 ffffffff81061dbd ffffc90010eb0000 00000000fd800000
ffffc90010eb0000 ffffc90010eb0000 0000000000004000 ffff88021e01da80
Call Trace:
[] dump_stack+0x45/0x56
[] warn_slowpath_common+0x7d/0xa0
[] warn_slowpath_fmt+0x4c/0x50
[] ? iomem_map_sanity_check+0xc8/0xd0
[] __ioremap_caller+0x2d3/0x380
[] ioremap_nocache+0x17/0x20
[] wl_pci_probe+0x21a/0x6f0 [wl]
[] local_pci_probe+0x3e/0x70
[] pci_device_probe+0x121/0x130
[] driver_probe_device+0x87/0x3a0
[] __driver_attach+0x93/0xa0
[] ? __device_attach+0x40/0x40
[] bus_for_each_dev+0x63/0xa0
[] driver_attach+0x1e/0x20
[] bus_add_driver+0x1e8/0x2a0
[] ? 0xffffffffa0825fff
[] driver_register+0x74/0x150
[] ? 0xffffffffa0825fff
[] __pci_register_driver+0x4c/0x50
[] wl_module_init+0x1e/0x1000 [wl]
[] do_one_initcall+0xfa/0x1b0
[] ? set_memory_nx+0x43/0x50
[] load_module+0x12b2/0x1b80
[] ? store_uevent+0x40/0x40
[] SyS_finit_module+0x86/0xb0
[] system_call_fastpath+0x1a/0x1f
---[ end trace 98168fa7dd6ec919 ]---
malloc in abgphy done
wl driver 6.30.223.141 (r415941) failed with code 21
------------[ cut here ]------------
Kernel BUG at ffffffffa059c85c [verbose debug info unavailable]
invalid opcode: 0000 [#1] SMP
Modules linked in: snd_pcm(F) snd_page_alloc(F) snd_seq_midi(F) snd_seq_midi_event(F) wl(POF+) snd_rawmidi(F) snd_seq(F) snd_seq_device(F) snd_timer(F) snd(F) soundcore(F) lib80211 drm cfg80211 microcode(F+) lpc_ich dm_multipath(F) serio_raw(F) scsi_dh(F) mac_hid xfs(F) parport_pc(F) ppdev(F) coretemp adt7475 hwmon_vid lp(F) parport(F) btrfs(F) xor(F) zlib_deflate(F) raid6_pq(F) libcrc32c(F) hid_generic usbhid hid pata_acpi firewire_ohci psmouse(F) firewire_core crc_itu_t(F) pata_jmicron ahci(F) libahci(F) sky2 floppy(F)
CPU: 0 PID: 505 Comm: systemd-udevd Tainted: PF W O 3.11.0-12-generic #19-Ubuntu
Hardware name: OEM OEM/LP UT P35, BIOS 6.00 PG 09/19/2008
task: ffff88021ea82ee0 ti: ffff88021e01c000 task.ti: ffff88021e01c000
RIP: 0010:[] [] wl_cfg80211_detach+0xfc/0x100 [wl]
RSP: 0018:ffff88021e01da18 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff88021f14b400 RCX: 0000000000001ba9
RDX: ffff88021f14b400 RSI: ffff88021e017458 RDI: ffff88021ec00000
RBP: ffff88021e01da38 R08: 000000000000000a R09: 00000000000003ea
R10: 0000000000000000 R11: ffff88021e01d826 R12: ffff88021e017418
R13: ffff88021e017458 R14: ffff88021f14b400 R15: ffff88021e017400
FS: 00007fcbc983e880(0000) GS:ffff88022fc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0433370000 CR3: 00000002206a0000 CR4: 00000000000007f0
Stack:
ffffffffa0594676 ffff88021e017400 ffff88021ec00000 0000000000000000
ffff88021e01daf0 ffffffffa0594e4d 0000000000000000 ffff88021e01daa8
ffffffffa0778e88 000000001e017400 0000000000000246 ffff880223c7d000
Call Trace:
[] ? wl_free_if.isra.12+0x26/0xc0 [wl]
[] wl_free+0x8d/0x2a0 [wl]
[] ? printk+0x67/0x69
[] wl_pci_probe+0x374/0x6f0 [wl]
[] local_pci_probe+0x3e/0x70
[] pci_device_probe+0x121/0x130
[] driver_probe_device+0x87/0x3a0
[] __driver_attach+0x93/0xa0
[] ? __device_attach+0x40/0x40
[] bus_for_each_dev+0x63/0xa0
[] driver_attach+0x1e/0x20
[] bus_add_driver+0x1e8/0x2a0
[] ? 0xffffffffa0825fff
[] driver_register+0x74/0x150
[] ? 0xffffffffa0825fff
[] __pci_register_driver+0x4c/0x50
[] wl_module_init+0x1e/0x1000 [wl]
[] do_one_initcall+0xfa/0x1b0
[] ? set_memory_nx+0x43/0x50
[] load_module+0x12b2/0x1b80
[] ? store_uevent+0x40/0x40
[] SyS_finit_module+0x86/0xb0
[] system_call_fastpath+0x1a/0x1f
Code: e0 66 90 fb 66 66 90 66 66 90 4c 89 f7 e8 7d b3 ff ff 4c 89 f7 e8 55 b4 ff ff 4c 89 f7 e8 ed cd ff ff 5b 41 5c 41 5d 41 5e 5d c3 0b 0f 0b 66 66 66 66 90 55 48 89 e5 41 56 41 55 41 54 49 89
RIP [] wl_cfg80211_detach+0xfc/0x100 [wl]
RSP
---[ end trace 98168fa7dd6ec91a ]---
snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X
SKU: Nid=0x1d sku_cfg=0x4006e603
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000006
SKU: customization=0x000000e6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x1
SKU: override=0x1
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x1e/0x0
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
dig-in=0x1f
realtek: No valid SSID, checking pincfg 0x4006e603 for NID 0x1d
realtek: Enabling init ASM_ID=0xe603 CODEC_ID=10ec0885
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
microcode: CPU1 sig=0x6fb, pf=0x10, revision=0xb3
microcode: CPU2 sig=0x6fb, pf=0x10, revision=0xb3
microcode: CPU3 sig=0x6fb, pf=0x10, revision=0xb3
microcode: Microcode Update Driver: v2.00 , Peter Oruba
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.38 Wed Jan 8 19:32:30 PST 2014
device label btrm0d5p1 devid 1 transid 10 /dev/sdf1
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
type=1400 audit(1407718555.615:2): apparmor="STATUS" operation="profile_load" parent=544 profile="unconfined" name="/sbin/dhclient" pid=548 comm="apparmor_parser"
type=1400 audit(1407718555.615:3): apparmor="STATUS" operation="profile_load" parent=544 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=548 comm="apparmor_parser"
type=1400 audit(1407718555.615:4): apparmor="STATUS" operation="profile_load" parent=544 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=548 comm="apparmor_parser"
type=1400 audit(1407718555.615:5): apparmor="STATUS" operation="profile_replace" parent=545 profile="unconfined" name="/sbin/dhclient" pid=547 comm="apparmor_parser"
type=1400 audit(1407718555.615:6): apparmor="STATUS" operation="profile_replace" parent=545 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=547 comm="apparmor_parser"
type=1400 audit(1407718555.615:7): apparmor="STATUS" operation="profile_replace" parent=545 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=547 comm="apparmor_parser"
type=1400 audit(1407718555.615:8): apparmor="STATUS" operation="profile_replace" parent=544 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=548 comm="apparmor_parser"
type=1400 audit(1407718555.615:9): apparmor="STATUS" operation="profile_replace" parent=544 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=548 comm="apparmor_parser"
type=1400 audit(1407718555.615:10): apparmor="STATUS" operation="profile_replace" parent=545 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=547 comm="apparmor_parser"
type=1400 audit(1407718555.615:11): apparmor="STATUS" operation="profile_replace" parent=545 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=547 comm="apparmor_parser"
device label btrm0d5p1 devid 1 transid 10 /dev/sdf1
device label btrfs0 devid 1 transid 9625 /dev/sdd6
device label btrfs0 devid 1 transid 9625 /dev/sdd6
init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
init: statd main process (817) terminated with status 1
init: statd main process ended, respawning
init: statd main process (822) terminated with status 1
init: statd main process ended, respawning
init: statd main process (827) terminated with status 1
init: statd main process ended, respawning
init: statd main process (832) terminated with status 1
init: statd main process ended, respawning
init: statd main process (838) terminated with status 1
init: statd main process ended, respawning
init: statd main process (843) terminated with status 1
init: statd main process ended, respawning
init: statd main process (849) terminated with status 1
init: statd main process ended, respawning
sky2 0000:04:00.0 eth0: enabling interface
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: statd main process (854) terminated with status 1
init: statd main process ended, respawning
init: statd main process (885) terminated with status 1
init: statd main process ended, respawning
init: statd main process (907) terminated with status 1
init: statd main process ended, respawning
init: statd main process (912) terminated with status 1
init: statd respawning too fast, stopped
sky2 0000:06:00.0 eth1: enabling interface
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
init: udev-fallback-graphics main process (987) terminated with status 1
EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null)
device label btrfs0 devid 1 transid 9625 /dev/sdd6
btrfs: enabling auto defrag
btrfs: use lzo compression
btrfs: disk space caching is enabled
FS-Cache: Loaded
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
sky2 0000:06:00.0 eth1: Link is up at 1000 Mbps, full duplex, flow control both
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: avahi-cups-reload main process (1291) terminated with status 1
audit_printk_skb: 33 callbacks suppressed
type=1400 audit(1407718561.095:23): apparmor="STATUS" operation="profile_load" parent=1220 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1268 comm="apparmor_parser"
type=1400 audit(1407718561.095:24): apparmor="STATUS" operation="profile_load" parent=1220 profile="unconfined" name="/usr/sbin/cupsd" pid=1268 comm="apparmor_parser"
type=1400 audit(1407718561.095:25): apparmor="STATUS" operation="profile_replace" parent=1220 profile="unconfined" name="/usr/sbin/cupsd" pid=1268 comm="apparmor_parser"
init: failsafe main process (1070) killed by TERM signal
type=1400 audit(1407718565.322:26): apparmor="STATUS" operation="profile_load" parent=1453 profile="unconfined" name="/usr/sbin/cups-browsed" pid=1457 comm="apparmor_parser"
type=1400 audit(1407700598.391:27): apparmor="STATUS" operation="profile_replace" parent=1553 profile="unconfined" name="/sbin/dhclient" pid=1559 comm="apparmor_parser"
type=1400 audit(1407700598.391:28): apparmor="STATUS" operation="profile_replace" parent=1553 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1559 comm="apparmor_parser"
type=1400 audit(1407700598.391:29): apparmor="STATUS" operation="profile_replace" parent=1553 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1559 comm="apparmor_parser"
type=1400 audit(1407700598.391:30): apparmor="STATUS" operation="profile_replace" parent=1553 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1559 comm="apparmor_parser"
type=1400 audit(1407700598.391:31): apparmor="STATUS" operation="profile_replace" parent=1553 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1559 comm="apparmor_parser"
type=1400 audit(1407700598.391:32): apparmor="STATUS" operation="profile_replace" parent=1553 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1559 comm="apparmor_parser"
type=1400 audit(1407700598.443:33): apparmor="STATUS" operation="profile_load" parent=1553 profile="unconfined" name="/usr/lib/libvirt/virt-aa-helper" pid=1563 comm="apparmor_parser"
type=1400 audit(1407700598.443:34): apparmor="STATUS" operation="profile_replace" parent=1553 profile="unconfined" name="/usr/sbin/cups-browsed" pid=1564 comm="apparmor_parser"
type=1400 audit(1407700598.447:35): apparmor="STATUS" operation="profile_replace" parent=1553 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1565 comm="apparmor_parser"
type=1400 audit(1407700598.447:36): apparmor="STATUS" operation="profile_replace" parent=1553 profile="unconfined" name="/usr/sbin/cupsd" pid=1565 comm="apparmor_parser"
zram: module is from the staging directory, the quality is unknown, you have been warned.
zram: Created 4 device(s) ...
Adding 1022016k swap on /dev/zram0. Priority:5 extents:1 across:1022016k SSFS
Adding 1022016k swap on /dev/zram1. Priority:5 extents:1 across:1022016k SSFS
Adding 1022016k swap on /dev/zram2. Priority:5 extents:1 across:1022016k SSFS
Adding 1022016k swap on /dev/zram3. Priority:5 extents:1 across:1022016k SSFS
init: Failed to spawn mysql main process: unable to execute: No such file or directory
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net ffffffff81cd29c0)
init: libvirt-bin main process (1942) terminated with status 6
init: libvirt-bin main process ended, respawning
init: libvirt-bin main process (2194) terminated with status 6
init: libvirt-bin main process ended, respawning
init: libvirt-bin main process (2211) terminated with status 6
init: libvirt-bin main process ended, respawning
init: libvirt-bin main process (2228) terminated with status 6
init: libvirt-bin main process ended, respawning
init: libvirt-bin main process (2245) terminated with status 6
init: libvirt-bin main process ended, respawning
init: libvirt-bin main process (2262) terminated with status 6
init: libvirt-bin main process ended, respawning
init: libvirt-bin main process (2279) terminated with status 6
init: libvirt-bin main process ended, respawning
init: libvirt-bin main process (2296) terminated with status 6
init: libvirt-bin main process ended, respawning
init: libvirt-bin main process (2313) terminated with status 6
init: libvirt-bin main process ended, respawning
init: libvirt-bin main process (2330) terminated with status 6
init: libvirt-bin main process ended, respawning
init: libvirt-bin main process (2347) terminated with status 6
init: libvirt-bin respawning too fast, stopped
nvidia 0000:01:00.0: irq 55 for MSI/MSI-X
init: plymouth-upstart-bridge main process ended, respawning
cgroup: systemd-logind (1276) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
cgroup: "memory" requires setting use_hierarchy to 1 on the root.
init: plymouth-stop pre-start process (2485) terminated with status 1
perf samples too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
nfsd: last server has exited, flushing export cache
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net ffffffff81cd29c0)
audit_printk_skb: 93 callbacks suppressed
type=1400 audit(1408192501.741:68): apparmor="STATUS" operation="profile_replace" parent=23681 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=23685 comm="apparmor_parser"
type=1400 audit(1408192501.741:69): apparmor="STATUS" operation="profile_replace" parent=23681 profile="unconfined" name="/usr/sbin/cupsd" pid=23685 comm="apparmor_parser"
type=1400 audit(1408192501.741:70): apparmor="STATUS" operation="profile_replace" parent=23681 profile="unconfined" name="/usr/sbin/cupsd" pid=23685 comm="apparmor_parser"
nfsd: last server has exited, flushing export cache
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net ffffffff81cd29c0)
Ebtables v2.0 registered
Bridge firewalling registered
type=1400 audit(1408212890.089:71): apparmor="DENIED" operation="open" parent=1 profile="/usr/bin/evince" name="/tmp/.X0-lock" pid=30293 comm="pool" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
systemd-hostnamed[30333]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
type=1400 audit(1408213907.307:72): apparmor="DENIED" operation="open" parent=1 profile="/usr/bin/evince" name="/tmp/.X0-lock" pid=30753 comm="pool" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
systemd-hostnamed[30755]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
init: systemd-logind main process (1276) killed by TERM signal